產品中心
- 微量注射泵
- smoothflow隔膜泵
- 蠕動泵
- 動物麻醉機
- 動物呼吸機
- 細胞融合儀
- 熒光蛋白觀察
- 痛覺測試儀
- 顯微操作
- 腦立體定位儀
- 行為學研究?jī)x器
- 動物溫度控制系統
- 動物手術設備
- 動物手術器材
- 清醒無束縛動物采血給藥系統
- 膜片鉗系統
- FST手術器械
- 動物血壓測量分析系統
- 動物監護儀
- 動物顱腦損傷
產品詳情
簡單介紹：
麻醉氣體吸收系統Anesthetic Evacuation System (AES)可用于各種動物麻醉機，回收動物呼出的麻醉氣體
詳情介紹：
麻醉氣體吸收系統在吸入麻醉中是不可或缺的。在持續時間較短的手術操作中或許可以忽略此裝置，但是我們推薦，超過二十分鐘的手術操作，或是空間較為狹小的實驗室，以及誘導麻醉的尾氣，必須經過吸收處理才可以排放到實驗室空氣中。國際通用的方法是采用內部填充活性炭顆粒的尾氣吸收罐F/AIR，尾氣中的殘余麻醉氣體被活性炭吸附，之后通過排出口排出。
? Powered unit for safe and effective removal of anesthetic waste gas
? Can be mounted to anesthesia machine pole or used as a free standing unit
? Two inlet ports allow connection to an induction chamber and an anesthesia machine simultaneously
麻醉氣體吸收系統可用于各種動物麻醉機，回收動物呼出的麻醉氣體。
麻醉氣體吸收系統（Anesthetic Evacuation System ，AES），負壓工作模式，高效地驅動麻醉尾氣進行處理，與桌式或立式麻醉機均可配合使用。
? Powered unit for safe and effective removal of anesthetic waste gas
? Can be mounted to anesthesia machine pole or used as a free standing unit
? Two inlet ports allow connection to an induction chamber and an anesthesia machine simultaneously
The Anesthetic Evacuation System (AES) will safely and actively remove waste gas associated with everyday inhalation anesthesia. It can be mounted on the pole of the CDS-2000, Vaporstick Plus or Vaporstick. It can also be used as a freestanding unit and simply placed on the benchtop. Two standard 19 mm (0.75 inch) inlets and one exhaust port allows easy hook-up to existing equipment. A 12 foot grounded electrical cord and lightweight tubing, allows for machine maneuverability.
The waste gas from the pop-off valve on most rebreathing anesthesia machines is collected by passive flow to the AES. This allows for safe operation of the anesthesia machine with little or no vacuum exposure. Using a push blower, the AES actively removes the waste gas from the unit. The blower has the capacity of moving 12 cubic feet/minute through up to 150 feet of tubing to an outside vent or fume hood. The on/off switch illuminates a green light when the unit is activated. The ‘on’ light assures the operator that the unit is functioning.
The Anesthetic Evacuation System includes a 3 inch and a 10 foot length of 19 mm ID hose and a 12.5 mm (0.5 inch) PVC Adapter. Additional lengths of tubing may be required and are available as an option along with an adapter to interconnect the 19 mm outlet tubing. An optional outlet line ceiling plate is available when connection to an outside wall is not convenient.
The waste gas from the pop-off valve on most rebreathing anesthesia machines is collected by passive flow to the AES. This allows for safe operation of the anesthesia machine with little or no vacuum exposure. Using a push blower, the AES actively removes the waste gas from the unit. The blower has the capacity of moving 12 cubic feet/minute through up to 150 feet of tubing to an outside vent or fume hood. The on/off switch illuminates a green light when the unit is activated. The ‘on’ light assures the operator that the unit is functioning.
The Anesthetic Evacuation System includes a 3 inch and a 10 foot length of 19 mm ID hose and a 12.5 mm (0.5 inch) PVC Adapter. Additional lengths of tubing may be required and are available as an option along with an adapter to interconnect the 19 mm outlet tubing. An optional outlet line ceiling plate is available when connection to an outside wall is not convenient.
